Ir a la página de inicio del Gobierno del Principado de Asturias

Datos del Documento

Utilice este identificador para citar o enlazar este documento:

Título: Composite Material for Thermochemical Energy Storage Using CaO/ Ca(OH)2
Autores: Álvarez Criado, Yolanda
Alonso, Mónica
Abanades, Juan Carlos
Palabras Claves: Almacenamiento de energía
Fecha Edición: 6-Sep-2015
Editor: Americal Chemical Society
Cita Bibliográfica:
Resumen: This work describes a material that has improved mechanical and reactivity properties for use in thermochemical energy storage systems based on CaO/Ca(OH)2 reversible reactions. The composite material uses sodium silicate as a binder of active CaO particles. The observed mechanical stability of the material is due to the formation of hard Ca silicates resulting from the reaction of the binder with the exterior of the CaO particles. A screening of the main synthesis variables affecting the composite was carried out, including Ca precursors of different particle size, a range of molar Ca/Si ratios, as well as the curing and calcination conditions. The most suitable material (containing CaCO3 with a particle size of 36−63 μm as calcium precursor and a molar Ca/Si ratio of 4.8−6.2, calcined in air at 850 °C) was tested over many hydration/dehydration cycles (up to 500) in a thermogravimetric apparatus. The material sustained high molar hydration conversions (between 0.6 and 0.7) and crushing strength values of >2 N after 200 cycles, when dehydrated in pure steam.
Aparece en las Colecciones:Ingeniería
Open Access DRIVERset

Archivos en este documento:

Archivo TamañoFormato
Archivo.pdf1,74 MBAdobe PDFVer/Abrir


Todos los documentos en RIA están protegidos por derechos de autor.

Valid XHTML 1.0! DSpace Software Copyright © 2002-2007 MIT and Hewlett-Packard - Contacto