Datos del Documento

Por favor, use este identificador para citar o enlazar este documento: https://ria.asturias.es/RIA/handle/123456789/7811
Título : Composite Material for Thermochemical Energy Storage Using CaO/ Ca(OH)2
Autor : Álvarez Criado, Yolanda
Alonso, Mónica
Abanades, Juan Carlos
Palabras clave : Almacenamiento de energía
Fecha de publicación : 6-sep-2015
Editorial : Americal Chemical Society
Citación : http://dx.doi.org/10.1021/acs.iecr.5b02688
Resumen : This work describes a material that has improved mechanical and reactivity properties for use in thermochemical energy storage systems based on CaO/Ca(OH)2 reversible reactions. The composite material uses sodium silicate as a binder of active CaO particles. The observed mechanical stability of the material is due to the formation of hard Ca silicates resulting from the reaction of the binder with the exterior of the CaO particles. A screening of the main synthesis variables affecting the composite was carried out, including Ca precursors of different particle size, a range of molar Ca/Si ratios, as well as the curing and calcination conditions. The most suitable material (containing CaCO3 with a particle size of 36−63 μm as calcium precursor and a molar Ca/Si ratio of 4.8−6.2, calcined in air at 850 °C) was tested over many hydration/dehydration cycles (up to 500) in a thermogravimetric apparatus. The material sustained high molar hydration conversions (between 0.6 and 0.7) and crushing strength values of >2 N after 200 cycles, when dehydrated in pure steam.
URI : https://ria.asturias.es/RIA/handle/123456789/7811
Aparece en las colecciones: Ingeniería
Open Access DRIVERset

Archivos en este documento:
Fichero Tamaño Formato  
Archivo.pdf1.74 MBAdobe PDFVer/Abrir
Mostrar el registro Completo

Ver estadísticas del documento

Este documento está sujeto a una licencia Creative Commons: Licencia Creative Commons Creative Commons